Before You Order Paving | Project Checklist | Paving Slabs Tiles

Before You Order Paving | Project Checklist | Paving Slabs Tiles

Use this checklist to prepare a paving order and identify any details that still need confirming. It is project guidance, not a substitute for product specifications or agreed delivery and return terms.

1. Check the product and chosen option

  • Confirm material, colour, finish, dimensions and thickness.
  • Read whether the option is a full pack, part pack, individual item or sample.
  • Check the product reference and the quantity included.
  • Ask about any dimension or application detail that is unclear.

Comparing 20 mm and 25 mm square granite slabs

Check the finished level at doors, steps and the edge of existing paving before ordering. Blue Grey granite and Glacier Ice Silver Grey granite both list a 600 × 600 mm face, with nominal thicknesses of 20 mm and 25 mm respectively. If the support and bedding are the same, that adds a nominal 5 mm to the finished surface for the thicker slab. Ask your installer to check actual thickness, bedding and drainage falls for your patio. Compare the piece count and stated coverage of the exact pack before ordering. See the granite paving buying guide for other formats and finishes.

2. Measure the area and plan the layout

Include changes in shape, borders, openings, steps and cuts. Compare the planned quantity with the selected option's published coverage. A mixed-size patio pack needs a compatible laying pattern; it should not be treated as a collection of interchangeable single slabs.

For a repeated single-size layout, compare Kandla Grey sandstone 900 × 600 mm slabs with Kandla Grey mixed-size sandstone patio packs for a layout using several slab sizes. Check the selected pack’s piece mix and listed coverage before calculating how many packs you need.

3. Compare appearance with the actual setting

Read our sample and split-pack guide to check the actual option, availability and any minimum quantity.

Use product photographs and available samples alongside the surrounding brickwork, doors and planting. Look at the finish in the intended space, and allow for natural variation where the product is natural stone.

4. Confirm delivery arrangements

Prepare the delivery postcode, quantity and any access restrictions. Read our kerbside delivery and site-access requirements, then confirm the unloading point, charges and timing for the order. Confirm these details before scheduling labour or making assumptions about where the materials can be placed.

5. Check returns and installation requirements

Read the 14-day consumer cancellation process and return transport estimates, and the damage reporting guidance, before purchase. Confirm compatible preparation, fixing and jointing materials with your installer, following the selected product's technical guidance.

Ready to check a detail?

Send the product name or SKU, measurements and postcode through the project enquiry form. You can also use the patio planner or read our paving FAQs.

Quantity and pack planning

How much paving do I need?

Measure the area, agree a cutting allowance with your installer, then compare the result with the selected full-size product option. Pack coverage, piece count and price belong to that option; a sample price is not the price for a patio.

After calculating, open your project list, add the exact option and choose “Use calculator measurements”. Check the selling coverage for that option separately.

A worked example using a 900 × 600 mm slab

A 6 m × 4 m rectangle is 24 m². A 900 × 600 mm slab has a nominal face area of 0.54 m². With an illustrative 10% allowance, 24 × 1.10 = 26.40 m², or 49 single slabs after rounding up. If a selected pack covers 21.60 m², the same target requires 2 whole packs.

These are calculation examples, not a recommended allowance or a promise that a particular pack is available. Joint widths, cuts, laying pattern, mixed sizes and the product's stated coverage affect the final order. For an L-shaped patio, add the areas of separate rectangles and enter that total below.

Planning with granite setts? This calculator estimates from face area. For a straight grid, use the granite sett layout guide to count positions along both runs, including the planned joints. Check the cuts before choosing a pack by piece count.

The default 10% is only the worked example above. Replace it with the allowance agreed for your layout. Use area packs for mixed sizes; no individual piece count is inferred. Straight edging uses length, not face area. These estimates exclude joints, corners and cuts and are not suitable for steps, wall cladding or flooring. A conflicting pack figure needs confirmation before ordering.

Example: 26.40 m² including a 10% allowance; approximately 49 single slabs before checking the layout.

Before adding the result to your order

  • Match the product, dimensions, pack option and SKU. Use the confirmed area for that exact pack, and compare its price separately.
  • Where coverage or thickness is marked “Confirm before ordering”, ask us before using it in the calculator. For example, the Sinai Pearl 30-piece option has conflicting area figures; Yorkstone thickness also needs confirmation.
  • Check samples and split packs and delivery access, postcode charges and returns before paying.

Understand pack coverage and price per square metre · Ask us to confirm pack coverage

Compare and plan

Compare products. Keep your project together.

Compare the listed details, then keep the products and quantity assumptions for your project.

Product comparison

Choose two products to compare their listed details. Material, format and intended quantity units can differ. Missing fields need confirmation for that product.

Confirm your selected option before ordering. For paving sold by area, enter the selling coverage confirmed for the exact pack. If the figures differ, keep the option in your list and ask about its coverage in your enquiry.

These are dated listing details. Follow each product link to check current options, availability and prices.

Budget planning

What might a UK patio paving project cost?

A patio budget usually combines several types of cost. Enter the figures you have been quoted — material per m², delivery for your postcode, preparation, installation materials and labour — and compare the estimate with your installer's quotation. Online product prices cover the paving material only; they do not establish the total project cost.

A worked example for a 20 m² patio

Measured 20 m² plus an illustrative 10% allowance gives 22 m² of planned area. With purely illustrative figures — material at £45 per m² (£990), delivery £120, site preparation £300, installation materials at £8 per m² (£176) and labour of 2 days at £250 per day (£500) — the subtotal is £2,086. Adding a 10% contingency (£208.60) gives an example total of £2,294.60.

Every figure above is an example for showing the arithmetic, not our price, not a market rate and not a quotation. Replace each one with the amounts quoted for your own project and postcode.

Empty fields are treated as not entered, not as free. The material and installation figures multiply by the planned area (measured area plus your allowance); labour per m² does the same, while day-rate labour multiplies by the number of days. Keep material estimates separate from installer and delivery quotations, and confirm the selected pack's coverage before using a material total to order.

Enter the figures you have been quoted, then calculate. The result is a planning estimate from your own numbers, not a quotation.

Before relying on the estimate